Use this steak doneness temperature chart to choose a pull temperature, account for carryover cooking, and check your steak accurately before serving. The guide works for grilling, pan-searing, oven finishing, broiling, and air-frying, with practical checks for different thicknesses and cooking methods.
Overview
A reliable steak internal temperature is more useful than judging doneness by color alone. A thermometer gives you a repeatable target, while resting allows the temperature to rise and the juices to redistribute. For the most consistent result, check the steak near the end of cooking, remove it slightly before the desired final temperature, and let it rest before slicing.
Temperatures below are practical kitchen targets for whole steaks. They are estimates rather than guarantees because steak thickness, pan temperature, starting temperature, bone structure, and cooking method all affect the result.
| Doneness | Pull from heat | Approximate final temperature | Expected center |
|---|---|---|---|
| Rare | 120–125°F (49–52°C) | 125–130°F (52–54°C) | Cool red center |
| Medium-rare | 125–130°F (52–54°C) | 130–135°F (54–57°C) | Warm red to pink center |
| Medium | 135–140°F (57–60°C) | 140–145°F (60–63°C) | Warm pink center |
| Medium-well | 145–150°F (63–66°C) | 150–155°F (66–68°C) | Slightly pink center |
| Well-done | 155–160°F (68–71°C) | 160°F (71°C) or higher | Little or no pink |
For food safety, a commonly used minimum target for whole cuts of beef is 145°F (63°C), followed by a rest. If you are cooking for someone who is pregnant, very young, older, or immunocompromised, consider choosing a more thoroughly cooked doneness and follow current food-safety guidance.
Checklist by scenario
Before cooking
- Identify the steak’s thickness at its thickest point. A thin steak may reach its target quickly, while a thick steak can develop a browned exterior before the center is ready.
- Use a clean, fast-reading digital thermometer if available. Check that the probe is clean before and after use.
- Decide on your final doneness, then choose a pull temperature from the chart. A thick steak generally needs a larger allowance for carryover cooking than a thin steak.
- Have a clean plate or rack ready for resting. Avoid placing the cooked steak back on a plate that held raw meat.
Grill or stovetop
- Cook the steak until the surface is well browned and the center is approaching the pull temperature.
- Insert the thermometer from the side into the thickest part, aiming for the center. Avoid touching bone, a fat pocket, or the hot pan.
- Check more than one spot if the steak is unevenly shaped. Use the lowest reliable reading as your guide.
- Remove the steak at the appropriate pull temperature and rest it for several minutes before checking again.
Oven, broiler, or air fryer
These methods can heat the exterior quickly, so begin checking earlier than a visual cue might suggest. For a thick steak, sear first and finish gently, or cook gently and sear at the end. Insert the thermometer through the side whenever possible. If the steak is thin, insert the probe horizontally so its tip reaches the center without passing through the meat.
For a thick steak
Use two-stage cooking when practical: bring the center gradually toward the target, then finish with high heat for browning. Begin temperature checks well before the expected finish. Thick steaks can continue rising several degrees during the rest, especially when they have been cooked over intense heat.
What to double-check
Thermometer placement: The tip must be in the middle of the thickest section. A reading taken near the surface will be higher; a reading that touches a pan, grill grate, or bone will not represent the meat accurately.
Carryover cooking: Heat continues moving from the hotter exterior toward the cooler center after the steak leaves the heat. The rise is not identical every time. Thick steaks, high-heat cooking, and tightly covered steaks often carry over more than thin steaks cooked gently. If your steak repeatedly overshoots, remove it earlier or rest it uncovered.
Resting: Rest the steak on a clean plate or rack for several minutes. A loose cover can retain warmth, but a tight covering may soften the crust and encourage additional carryover cooking. Recheck the temperature if you are trying to hit a precise doneness.
Temperature units: Make sure your thermometer is displaying Fahrenheit or Celsius as intended. To convert Fahrenheit to Celsius, subtract 32, multiply by 5, and divide by 9.
Common mistakes
- Cutting into the steak repeatedly: This releases juices and gives less useful information than a thermometer. Make one or two targeted checks instead.
- Using color as the only test: Lighting, seasoning, cooking method, and meat pigments can change the appearance. Color is a finishing check, not a dependable temperature measurement.
- Checking only the edge: The edge is usually more cooked than the center. Probe from the side into the thickest point.
- Forgetting the steak will keep cooking: Removing it at the final target can produce a more done result after resting. Use the pull-temperature column as a starting point.
- Ignoring uneven heat: A steak can be browned on one side and undercooked in the center. Rotate it when needed, use indirect heat for thick cuts, and check multiple locations.
- Reusing a raw-meat plate: Transfer cooked steak to a clean plate and wash hands, utensils, and surfaces that contacted raw meat.
When to revisit
Return to this chart whenever you cook a steak with a different thickness, cut, starting temperature, or method. A thin sirloin cooked in a skillet will not behave like a thick bone-in ribeye finished in the oven. Recheck your technique when changing from a grill to an air fryer, using a new thermometer, or cooking several steaks at once.
For a dependable workflow, write down the steak’s approximate thickness, cooking method, pull temperature, resting time, and final reading. If the result is too rare, cook it briefly again and recheck. If it is too done, shorten the next rest or remove the steak at a lower pull temperature. Revisit food-safety guidance periodically and before serving guests with higher health risks. For storage, freezing, and thawing steps, see How to Store, Freeze, and Thaw Steak Safely; for method-specific adjustments, compare Steak Cooking Method Comparison.
Quick final check: confirm the thermometer is clean, probe the thickest part, compare the reading with your chosen pull temperature, rest on a clean plate, and check again before slicing. That simple sequence makes the chart useful every time you cook steak.